• Home
  • About Us
  • Our Materials

2016 Summer Collection

Our Materials

Used green building materials to create a real safe & healthy environment.

 

Heartwood

"Our Core Materials"

Raw material used decides on the type of process and quality of solid wood engineered flooring. Hence, choice of raw materials should base on production and quality target, dimension, wood quality, structure, moisture content and other parameters of the raw materials would be checked to meet the requirement of floor board processingquality. Meanwhile, stringent control on temperature, deformation, pressure, accuracy etc are deployed to reduce the effect of processing errors on product quality.

 

Rotary Cut

Rotary Cut

The log is centered on a lathe and turned against a board cutting knife set into the log at a slight angle.

Quater Slicing

Quater Slicing

The slicing is made perpendictular to the annual growth rings of the tree. This creates a straight grain appearance

Lengthwise Slicing

Lengthwise Slicing

This is done from a board of fat sawn lumber rather than from a log. A variegated figure is created with this slice.

Different woods


The difference of Sapwood & Heartwood

"Understand what is the difference between two woods"

What is Heartwood?

What is Heartwood?

Heartwood (or duramen) is wood that as a result of a naturally occurring chemical transformation has become more resistant to decay. Heartwood formation is a genetically programmed process that occurs spontaneously. Some uncertainty exists as to whether the wood dies during heartwood formation, as it can still chemically react to decay organisms, but only once.Heartwood is often visually distinct from the living sapwood, and can be distinguished in a cross-section where the boundary will tend to follow the growth rings. For example, it is sometimes much darker. However, other processes such as decay or insect invasion can also discolor wood, even in woody plants that do not form heartwood, which may lead to confusion.

What is Saptwood?

What is Saptwood?

Sapwood (or alburnum) is the younger, outermost wood; in the growing tree it is living wood, and its principal functions are to conduct water from the roots to the leaves and to store up and give back according t o the season the reserves prepared in the leaves. All wood in a tree is first formed as sapwood. The more leaves a tree bears and the more vigorous its growth, the larger the volume of sapwood required. Hence trees making rapid growth in the open have thicker sapwood for their size than trees of the same species growing in dense forests. Sometimes trees (of species that do form heartwood) grown in the open may become of considerable size, 30 cm (12 in) or more in diameter, before any heartwood begins to form, example, in second-growth hickory, or open-grown pines.


High Graded Material Assurance

"All wood species used are recognized by PEFC and originated from legally exploited forest."

Glue

Glue

  • Eco-friendly glue
  • MUF Type 1. formaldehyde level class : Class E1
Core Materials Of Floor Board

Core Materials Of Floor Board

  • Malaysia Tropical Medium Hardwood
Veneer’s Wood Type

Veneer’s Wood Type

  • Natural precious wood species
Flooring Slab Board

Flooring Slab Board

  • Malaysia Tropical Medium Hardwood
Resistance To Termite Attack

Resistance To Termite Attack

  • Termite resistant formula
  • Fulfilling JAS
  • Australia specifications
Moisture Proof

Moisture Proof

  • JAS specification
  • T1 standard
Moisture Content

Moisture Content

  • 6-12%
Surface Coating

Surface Coating

  • Coating Technology :
    13 under coating varnish, 2 finishing coating varnish (quality UV coating material
  • Wear Resistance :
    10311 (number of revolutions)
  • Pencil Hardness : 6H
  • Scratch Resistance :
    40N pressure scratch test (scratch resistance 4)
  • Pollution Resistance :
    No obvious change
Finished Product Dimension

Finished Product Dimension

  • Dimension & tolerances :
    Thickness 12mm, 15mm (±0.5mm), Width 142mm (±2mm), Length 1220mm, 920mm, 610mm (+2mm/-0mm)
  • Product Ratio :
    1220 mm (≤60%); 920 mm (≥30%); 610 mm (≥10%)
  • Weight : 1.50-2.50 kg per sheet